Take the Xi'an Simo YR series (IP23) three-phase asynchronous motor YR355M1-4 as an example. "Y" represents an asynchronous motor; "R" represents a wound rotor type; "355" indicates the center height of the motor (in mm); "M" is the code for the frame length; "1" is the code for the core length; "4" represents the number of poles of the motor.
The YR series (IP23) three-phase asynchronous motors are general-purpose wound-rotor three-phase asynchronous motors, which are newly designed and updated products of Simo Motor. Their power ratings and installation dimensions comply with IEC standards. The enclosure protection level of the motor is IP23, the cooling method is IC01, and the duty is continuous (S1). They are suitable for places that do not contain flammable, explosive, corrosive gases and are relatively clean.
The Xi'an Simo YR series (IP23) three-phase asynchronous motors can provide a large starting torque with a small starting current and can adjust the speed within a certain range. They can be widely used in the following situations: 1. A larger starting torque than that of squirrel-cage rotor motors is required; 2. The capacity of the feeding line is not sufficient to start a squirrel-cage rotor motor; 3. The starting time is long and the starting is frequent; 4. A small-range speed regulation is required; 5. They are connected as an "electrical axis" for synchronous rotation, etc. For example, in machinery such as compressors, sugar presses, textile machines, hoists, wire drawing machines, and conveyor belts.
The YR series (IP23) three-phase asynchronous motors have the advantages of high efficiency and low noise. The motors comply with the technical conditions of JB5269 (H280), JB5270 (H315-355) for YR series (IP23) three-phase asynchronous motors.
The YR series (IP23) three-phase asynchronous motors adopt Class B insulation. The rated voltage is 380V, the rated frequency is 50HZ, with a △ connection method. Six (for H280) or three (for H315) outlet terminals are led out from the terminal box. The structure and installation type of the motor is IMB3 (the frame has a base foot, the end cover has no flange, horizontal type), and all are of the non-lifting brush structure. The altitude of the motor operation location does not exceed 100m. The maximum ambient air temperature varies with the season but does not exceed 40℃; the minimum ambient air temperature is -15℃, and the average maximum relative humidity of the wettest month is 90%, and at the same time, the average minimum temperature of that month is not higher than 25℃.
When starting the Xi'an Simo YR series (IP23) three-phase asynchronous motors, a starting rheostat must be pre-connected in the rotor circuit. It is not allowed to directly short-circuit the rotor winding for starting.
Xi'an Simo Motor (Group) Co., Ltd. is a large domestic enterprise specialized in manufacturing large and medium-sized, high and low-voltage, AC and DC motors. It is a systematic power system provider integrating motor design and manufacturing, electrical control, mechanical processing, mold, casting, transportation, and other automation and complete projects. Its production and sales scale ranks among the top in the national motor industry, maintaining a high-speed growth trend for 7 consecutive years. It was shortlisted in the top 500 of China's machinery industry in 2004 and ranked 58th in China's electrical industry in 2005. In 1995, it took the lead in obtaining the ISO9001-1994 quality system certification in the industry, and in August 2005, it passed the ISO9001-2000 quality system certification of the China Quality Certification Center (CQC). In May 2006, it passed the ISO14000 environmental management system and OHSAS18000 occupational health and safety management system certifications, and at the same time passed the European "CE", American "UL", and national mandatory "CCC" certifications. It is a quality and credit AAA-level enterprise. Its leading products have successively won honorary titles such as "Ministry/Provincial/Municipal Famous Brand Products", "Xi'an Inspection-free Products", and "China Glory Famous Brand Products".
In order to improve the quality of various electromechanical products, strengthen pre-sales and after-sales services, and make customers feel at ease and satisfied, Simo Motor resolutely implements the "Quality Assurance Statement" of eight scientific research and design institutes in the machine tool industry of the Ministry of Machinery Industry, conscientiously implements all the clauses in the statement, and strictly follows the rules and regulations of the ISO9001:2000 quality management system to ensure:
- Seriously implement relevant national standards, and strictly manufacture and inspect the products according to the standards or contract technical requirements. Unqualified products will not leave the factory.
- After the final assembly and on-line commissioning of various finished products such as product measurement bases, the assembly personnel conduct a 72-hour running test before delivery. Strictly conduct running-in tests and reliability tests according to relevant standards to improve the reliability of new products and eliminate early failures.
- Under normal sales conditions, the above-mentioned finished products are delivered strictly on schedule. Functional components are guaranteed to be supplied within three months, and can be supplied in advance in special cases. In case of delay, compensation will be implemented according to the "1997 New Measures for Quality Improvement".
- When customers find quality problems during the use of products, a reply will be made within 24 hours after receiving the customer's notice. For on-site services, start within 48 hours and ensure that maintenance personnel do not withdraw until the fault is eliminated.
- Complete technical documents are provided when the product leaves the factory. All product quality problems are covered by three guarantees (repair, replacement, return). If the product still does not meet the factory requirements after repair, the product will be returned or replaced.
- Simo Motor products are guaranteed for lifetime maintenance at cost after being sold.
- When placing an order, please first refer to the product catalog to determine the model specifications and other data of the required product. Try to select the standard specification products listed in the catalog. Please indicate the motor model, power, speed regulation, voltage, frequency, noise, and installation type in the order contract. If the noise level is not specified, it will be supplied as level 2.
- For 2-pole motors with a power of 5.5KW and above and 4-pole motors with a power of 38KW and above, belt drive cannot be used.
- If there are no special requirements, the default parameters of Simo Motor are: the installation method is horizontal B3, the insulation class is Class B, and the protection level is IP44.
- If there are special requirements, such as double shaft extension, reverse terminal box position, reverse rotation of the shaft, requirements to be made into a wet tropical type, outdoor anti-corrosion type, or others, they need to be clearly indicated in the contract and contact our factory in advance.
簡(jiǎn)體中文
