There are various reasons for bearing damage, and common ones include insufficient lubrication, improper lubrication, incorrect bearing installation, bearing overload, current passing through the bearing, excessive motor vibration, etc. Among these factors, the lubrication problem is the most common and also the most easily overlooked cause. Improper or insufficient lubrication will lead to an increase in the bearing temperature and 加劇 wear, ultimately causing the bearing to fail.

Bearing Damage Caused by Insufficient or Improper Lubrication

Cause Analysis:

Insufficient Lubrication: During the operation of the motor, the bearing needs to rely on lubricating grease or lubricating oil to reduce friction. If the lubrication is insufficient, the friction resistance of the bearing increases, the temperature rises, causing the lubricating grease to deteriorate rapidly, which in turn leads to bearing wear and even seizing.

Improper Lubrication: Choosing an inappropriate lubricant or a lubricant that does not meet the quality standards will also have an adverse effect on the bearing. There are a wide variety of lubricants, and different types of motors and working environments require the use of different lubricants. Using an inappropriate lubricant may lead to the rupture of the lubricating film and the failure of lubrication.

Lubrication Contamination: During the use of the lubricant, it may be affected by external contaminants, such as dust, moisture, chemical substances, etc. These contaminants entering the inside of the bearing will accelerate the deterioration of the lubricant, thus damaging the performance of the bearing.

Solutions:

Select the Appropriate Lubricant: According to the type of the motor, the working environment, the operating temperature, and the load conditions, select the appropriate type of lubricant. Generally, lubricating grease is suitable for high-speed and light-load bearings, while lubricating oil is suitable for low-speed and heavy-load bearings. In the design and maintenance of motors, Xi'an Simo Motor will recommend suitable lubricants according to the specific usage environment of customers to ensure the best operating state of the bearings.

Regularly Inspect and Replace the Lubricant: Formulate a scientific lubrication maintenance plan and regularly inspect the lubrication state of the bearings. For motors that operate for a long time or in a high-temperature environment, it is recommended to shorten the replacement cycle of the lubricant. Usually, it is possible to determine whether the lubricating grease needs to be replaced by detecting its color, smell, and viscosity.

Keep the Lubrication System Clean: When adding or replacing the lubricant, ensure the cleanliness of the lubrication equipment and the surrounding environment to prevent impurities from entering the inside of the bearing. If necessary, a filtering device can be used to purify the lubricant to prevent the entry of contaminants.

Preventive Measures:

Install a Lubrication Monitoring System: In modern industrial production, a lubrication monitoring system can be installed to monitor the lubrication state of the bearing in real time. Once the situation of insufficient lubrication or deterioration of the lubricant is detected, the system will promptly issue an alarm to prompt the operator to deal with it.

Establish a Regular Training Mechanism: Conduct regular training for operators and maintenance personnel so that they understand the importance of bearing lubrication and master the correct lubrication operation methods. Xi'an Simo Motor is committed to providing customers with comprehensive technical support and training services to ensure that customers' equipment is always in the best operating state.

Optimize the Bearing Design: In the motor design stage, optimize the selection and configuration of the bearings. By using high-performance sealed bearings, low-friction bearings, etc., reduce the dependence on lubrication and improve the overall service life of the bearings.

Case Analysis:

In a customer feedback, we found that multiple motors in a certain factory frequently had bearing failures. After on-site inspection and data analysis, we found that the root cause of the problem was the poor quality of the lubricating grease and the too long replacement cycle. The technical team of Xi'an Simo Motor quickly formulated a lubrication improvement plan for the customer, including replacing the high-temperature lubricating grease more suitable for its working environment and shortening the replacement cycle. After the improvement, the failure rate of the motor bearings decreased significantly, and the production line operated more stably.

The bearing is a crucial component in the motor, and its operating state directly affects the overall performance of the motor. Through reasonable lubrication management, the service life of the bearing can be effectively extended, and the failure rate of the motor can be reduced. With years of industry experience, Xi'an Simo Motor provides customers with professional motor maintenance services, helping customers reduce downtime and lower maintenance costs. If you encounter any bearing problems during the use of the motor, you are welcome to contact Xi'an Simo Motor, and we will provide you with professional technical support and services.